Dah Bah Machinery Enterprise

DAH BAH

Products

Automatic 3-Side-Seal Bag Making Machine (3-Servo System)－ABM-53S Series

E-CATALOG

Features

Model No.		ABM-53S	ABM-63S	ABM-73S
MAX. PARENT WEB WIDTH		400~1000 mm	400~1200 mm	400~1400 mm
MAX. PARENT WEB DIAMETER		650/800 mm	650/800 mm	650/800 mm
MAX. BAG WIDTH		500 mm	600 mm	700 mm
MAX. BAG LENGTH		500 mm	500 mm	500 mm
MAX. MACHINE SPEED		180 Cuts/min.	180 Cuts/min.	180 Cuts/min.
Installation information (standard specification)	Net weight	4700kg	4800kg	5000kg
	Area required	L12141xW5229xH1795	L12462xW5149xH1980	L12550xW5620xH2195
	Power	380V/31KW/65A	380V/33KW/67A	380V/35KW/69A
	Water	15-20℃	15-20℃	15-20℃
	Air	6kg/cm3	6kg/cm3	6kg/cm3

Materials

Main Drive & Feeding Motor

Main drive servo motor with driver provide accurate sealing time control, suitable for constant sealing time control system.

Feeding Motor

Equipped with two sets of servo motors and drivers, which can raise the production speed and provide accurate bag length control.

Unwind section

Horizontal type unwind stand / Swing-out/Lift-up type mechanical shaft with 3" adapters makes loading and unloading more convenient.
Equipped with Automatic Tension Controller (diameter calculating type), provide constant and stable web tension control.
Equipped with Line/Edge Position Controller (LPC), provide accurate bag sealing and trimming position.
Upgraded dancer-roller provides stable tension for films before entering the bag making section.

Bag Making

Four-lanes operation for making 3-side-seal bags.
Longitudinal double sealing device and cooling devices provides each sealing area could be sealed twice by different sealing temperature. Suitable for high-speed production and ensure the bag sealing quality.
Equipped with skip operation system, the maximum bag-length could be extended. (skip-times: as request).
Equipped with automatic lift-up mechanism to lift up the upper sealing stands and bars to avoid overheating the material when the machine stops.
The design of safety cutter provides extra safety for the operator.

Maintenance

Equipped with covered bearing, which is unnecessary for lubrication, prolong the parts life and makes maintenance easier, faster and cleaner.

Computer Control System,Touch-Screen, and 3-Servo System

Maintain a constant sealing time, which may largely reduce test-run scraps. When the machine speed is changed, it is not necessary to adjust temperature of the heater.
Touch-screen makes operation easier and faster.
Built-in Sealing Temperature Controller.
Auto alarm/Stop available for abnormal condition.
Alarm messages are displayed on the screen.
Modem interface available for remote maintenance.
Operation and maintenance procedures and parameters are memorized in the computer control system for easy setup or review.
Data base for saving 100 sets of working parameters.

Optional Accessories