Narrow Width Slitting Machine－SLF-MB200 Series
Features
SLF-MB200 Series
| Model No. | SLF-MB200 |
| MAX. PARENT WEB WIDTH | 500~2000 mm |
| MAX. PARENT WEB DIAMETER | 500/650/800/1000 mm |
| THICKNESS RANGE | Depends on various materials' conditions |
| MAX. REWIND DIAMETER | 420/600/800 mm |
| MIN. SLIT WIDTH | 20 mm (Depends on various materials' conditions) |
| UNWIND/REWIND CORE I.D. | 3" (Or as request) |
| MAX. MACHINE SPEED | 200/300 M/min. |
Installation information
(For 1000mm standard machine) | Net weight | 3000kg |
| Area required | L2200xW3300XH1405 |
| Power | As request |
| Air | 6kg/cm 3 |
| Application & Materials |
- OPP, PET, CPP, PVC(rigid), Shrinkable PP Film, Cellophane, Paper, Silicon Coated Paper, Metalized Paper, Self-adhesive Paper, Aluminum Foil, Copper Foil, Thermal Transfer Film, Non-woven Cloth, Formed PP, PS.
|
| Rewinding type |
- Surface-center rewinding with duplex rewind-shafts.
|
| Unwinding section |
- Lift-up type mechanical shaft with φ3" adapters for heavier web loading.
- Equipped with edge position control (EPC) to provide accurate slitting position.
|
| Unwinding tension control |
- Equipped with automatic tension controller (diameter-calculating type) to provide stable tension and easy operation.
|
| Slitting section |
- Shear knife cutting or razor blade cutting in the air or groove is available according to material characteristics.
- Static eliminating device equipped.
- Equipped with automatic counter which will stop the machine when reaching pre-set length.
|
| Rewinding section |
- Equipped with rewind AC induction servomotors to provide constant tension. Rewind tension gain is also adjustable.
- Lift-up type mechanical shaft for heavier roll unloading.
|
| Rewinding tension control |
- Automatic tension control system.
- Equipped with pneumatic/hydraulic pressure control system. Pressure is adjustable according to finish-rolls' condition.
|
| Trimmed waste |
- Equipped with blower and expulsion tube.
|
| Optional Accessories |
- Unwind hydraulic loading device (with shaft)
- Unwinding/rewinding airshaft φ3"/6"
- φ 6" air chuck
- Shaftless unwind stand (Electrical left/right moving)
- Unwind shaftless hydraulic loading device (Hydraulic up/down, left/right moving)
- Line position control (LPC)
- Automatic tension controller with load cell (Unwinding section)
- Splicing table with suction device
- Shear cutter blade/razor blade/cutter holder
- Shear cutter/razor cutter holder for slitting width less than 20 mm
- Trim rewinder with speed synchronizing system
- Mechanical shaft for different rewinding core sizes
|
- The working speed depends on the material condition and slit-width.
- Due to machine development, above information maybe changed without notice.
