Surface-Winding Slitting Machine－SLF-C200 Series
Features
- SURFACE-WINDING SLITTING ACHINE
SLF-C200 Series
| Model No. | SLF-C200 |
| MAX. PARENT WEB WIDTH | 600~2000 mm |
| MAX. PARENT WEB DIAMETER | 1500 mm |
| THICKNESS RANGE | 30~800 gsm |
| MAX. REWIND DIAMETER | 1200 mm |
| MIN. SLIT WIDTH | 20 mm ( Depends on various materials' conditions ) |
| UNWIND/REWIND CORE I.D. | 3" ( Or as request ) |
| MAX. MACHINE SPEED | 200/300 M/min. |
Installation information
(For 1000mm standard machine) | Net weight | 3300kg |
| Area required | L4070xW2920xH3975 |
| Power | As request |
| Air | 6kg/cm 3 |
| Application & Materials |
- Kraft Paper, Regular Paper, Metalized Paper, Aluminum Foil + Paper, Non-woven Cloth, and other paper of regular thickness-variation.
|
| Rewinding type |
- Surface rewinding with duplex rewind-shafts.
|
| Unwinding section |
- Lift-up type mechanical shaft with φ3" adapters for heavier web loading.
- Equipped with edge position control (EPC) to provide accurate slitting position.
- Equipped with pneumatic brake as well as electro/pneumatic converter for wide range tension control.
|
| Unwinding tension control |
- Equipped with automatic tension controller (diameter-calculating type) to provide stable tension and easy operation.
|
| Slitting section |
- Equipped with circular shear cutter for all kind of material consisting of fiber.
- Equipped with automatic counter which will stop the machine when reaching the pre-set length.
|
| Rewinding section |
- Lift-up type mechanical shaft for heavier roll unloading.
- Rewinding shafts for various rewinding core sizes are available.
|
| Rewinding tension control |
- Powder clutch with manual tension control System.
- Equipped with lay-on rollers.
|
| Trimmed waste |
- Equipped with expulsion tube.
|
| Optional Accessories |
- Unwind hydraulic loading device (with shaft)
- Unwinding/rewinding airshaftφ3"/6".
- φ6" air chuck
- Shaftless unwind-stand(Electrical left/right moving)
- Unwind shaftless hydraulic loading device (Hydraulic up/down, left/right moving)
- Line position control (LPC)
- Unwind/rewind automatic tension controller with load-cell
- Trim rewinder with speed synchronizing system
- Shear cutter blade/razor blade/cutter holder
- Mechanical shaft for different core sizes
- Rewind lay-on roller pressure control.
|
- The working speed depends on the material condition and slit-width.
- Due to machine development, above information maybe changed without notice.
