Heat-Sealing & Slitting Machine － SLF-HS100 Series
Features
- HEAT-SEALING & SLITTING MACHINE
SLF-HS100 Series
| Model No. | SLF-HS100 |
| MAX. PARENT WEB WIDTH | 1000 mm |
| MAX. PARENT WEB DIAMETER | 600 mm |
| THICKNESS RANGE | 15~120 μ ( Depends on various materials' conditions ) |
| MAX. REWIND DIAMETER | 400 mm |
| MIN. SLIT WIDTH | 50 mm ( Depends on various materials' conditions ) |
| UNWIND/REWIND CORE I.D. | 3" ( Or as request ) |
| MAX. MACHINE SPEED | 200 M/min. |
Installation information
(Standard machine) | Net weight | 2800kg |
| Area required | L1390xW2350xH1410 |
| Power | As request |
| Air | 6kg/cm 3 |
| Materials |
- Heat-sealable PP、BHDPE、BLDPE、BLLDPE tubes (for heat-sealing) or regular plastic films (for slitting).
|
| Rewinding type |
- Differential center rewinding with duplex rewind-shafts.
|
| Unwinding section |
- Equipped with swing-out/lift-up compatible type mechanical shaft with φ3" adapters.
- Equipped with edge position control (EPC) to provide accurate slitting position.
|
| Unwinding tension control |
- Equipped with automatic tension controller (diameter-calculating type) to provide stable tension and easy operation.
|
| Slitting section |
- Pneumatic controlled heating knife with automatic temperature controller ensure consistent sealing quality during high speed running.
- Equipped with razor-cutters, so that this machine can be used as a slitting machine.
- Static eliminating device equipped.
- Equipped with automatic counter which will stop the machine when reaching the pre-set length.
|
| Rewinding section |
- Swing-out type rewind stand for easy operation.
- Equipped with 3" bakelite collars for irregular thickness material
- Equipped with banana roller for film expanding.
- Equipped with lay-on rollers.
|
| Rewinding tension control |
- Manual tension control.
- The rewind tension results from double friction of bakelite collars and powder clutches, which can make the tension of each roll regular.
|
| Trimmed waste |
- Equipped with expulsion tube.
|
| Optional Accessories |
- Unwind hydraulic loading device (with shaft)
- Unwinding airshaft φ3"/6"
- φ6" airchuck
- Shaftless unwind stand(Electrical left/right moving)
- Line position control (LPC)
- Unwind/rewind automatic tension controller with load-cell
- Trim rewinder with speed synchronizing system
- Heat-sealing cutter
- razor blade/cutter holder
- Unloading device
|
- The working speed depends on the material condition and slit-width.
- Due to machine development, above information maybe changed without notice.
