Turret-Winding Type Slitting Machine－SLF-R70T/SLF-R70TT/SLF-R100TT Series
Features
- TURRET-WINDING TYPE SLITTING MACHINE
SLF-R70T/SLF-R70TT/SLF-R100TT Series
| Model No. | SLF-R70T |
SLF-R70TT |
SLF-R100TT |
| APPLICABLE MATERIAL | THERMAL TRANSFER RIBBON, 6~12μ |
THERMAL TRANSFER RIBBON, 6~12μ |
THERMAL TRANSFER RIBBON, 6~12μ |
| MAX. PARENT WEB WIDTH | 700~1000 mm |
700~1000 mm |
700~1000 mm |
| MAX. PARENT WEB DIAMETER | 650 mm |
650 mm |
650 mm |
| MAX. REWIND DIAMETER | 40 ~220 mm |
40 ~220 mm |
40 ~220 mm |
| MIN. SLIT WIDTH | 90 mm |
90 mm |
90 mm |
| UNWIND CORE I.D. | 6" ( Or as request ) |
6" ( Or as request ) |
|
| REWIND CORE I.D. | 1" ( Or as request ) |
1" ( Or as request ) |
|
| MAX. MACHINE SPEED | 700~1000 mm |
200 M/min |
200 M/min |
Installation information
(For 700mm standard machine) | Net weight | 1600kg |
1650kg |
|
| Area required | L3037xW2320xH1586 |
L3037xW2320xH1586 |
|
| Power | As request |
As request |
|
| Air | 6kg/cm 3 |
6kg/cm 3 |
|
| Application & Materials |
- Thermal transfer ribbon, PET
|
| Rewinding type |
- Center rewinding with duplex rewind-shafts.
|
| Unwinding section |
- Equipped with swing-out/lift-up compatible type mechanical shaft with φ3" adapters
|
| Unwinding tension control |
- Equipped with automatic tension controller and load-cells. The actual tension is digitally displayed, increasing the tension control precision with minimal operation effort.
|
| Wrapping film joint device |
- Equipped with splicing device for packaging with automatic web return function (controlled by PLC). Make almost no waste when splicing and packing. Lower down the cost and raise your efficiency.
- Equipped with splicing table with pneumatic press-bar? for easy operation.
- Equipped with auto-counter, automatically positioning and packing after splicing.
|
| Slitting section |
- Equipped with two sets D.C. TQ motors to provide constant tension. Rewind tension gain is also adjustable.
- Equipped with automatic rewinding shafts shifting turrets (2 sets), which can largely save the loading and unloading time. (Standard specification for SFL-R70TT)
- Equipped with lift-up type mechanical rewinding shaft (1"), suitable for various size of rewinding cores.
|
| Rewinding tension control |
- Special rewinding tension control system, suitable for the rewinding hardness characteristic of Thermo-transfer-ribbon, Easy operation.
- The pneumatic control system for lay-on rollers for pressing the finish rolls, is adjustable to meet different materials' requirements.
|
| Trimmed waste |
- Equipped with blower and expulsion tube.
|
| Optional Accessories |
- Unwind hydraulic loading device (with shaft)
- Unwinding/rewinding airshaft φ3"/6"
- φ6" air chuck
- Shaftless unwind-stand (Electrical left/right moving)
- Unwind shaftless hydraulic loading device (Hydraulic up/down, left/right moving)
- Special razor holder for slit-width less than 20mm
- Razor blade / Magnetic-fixing type razor holder
- Mechanical shaft for different sizes rewinding core
|
- SL-R70TT: Model name for machine with Turret type rewinding shaft changer.
- The working speed depends on the material condition and slit-width.
- Due to machine development, above information maybe changed without notice.
